Table Lights:
- Before placing your light on a surface, check the rubber padding to ensure it won’t leave any marks.
- For extra protection, we recommend placing a piece of cloth or paper under the base to prevent scratches or scuffs, especially on delicate surfaces.
- Adjust the cord placement, ensuring it is safely out of the way to prevent tripping hazards or tangling.
Wall Lights:
- Your light comes with Gantri’s patented wall mount kit, which includes a screw and anchor for drywall installation.
- Locate the desired placement on your wall.
- Assemble the wall mount according to the instructions provided.
*If installing into a stud, you may not need the anchor, but ensure the screw is firmly secured. Double-check that the cord runs cleanly along the wall, using clips to secure it if needed.
Floor Lights:
- Place the base on a stable surface and thread the power cord through the rod, making sure it’s neatly tucked to avoid any trip hazards.
- Assemble the rods according to the instructions provided, ensuring all pieces are securely attached.
- Position the light in your desired space, and ensure it is stable by checking that all connections are tightened.
- If your light feels unstable, try repositioning or using felt pads under the base for added support on uneven floors.
Clamp Lights:
- The clamp can open up to a maximum of 1-5/8”, making it suitable for most desks, shelves, or other surfaces.
- Position the clamp on the desired surface and tighten the knob until it’s securely fastened.
- Adjust the angle of the light to direct it where needed, and ensure the clamp is stable and won’t slide or shift during use.
- Make sure the power cord is safely out of the way, keeping it tidy with clips or wraps as needed.
Pendant Lights:
- Verify that the ceiling mount is compatible with your space and can securely support the weight of the light.
- Follow the included instructions to install the ceiling mount, making sure it is fastened securely into a structural ceiling element.
- Adjust the cord length to your preferred height, thread it through the ceiling mount, and ensure the light hangs level before securing everything in place.