How do I install my light?Updated a month ago

Table Lights:

1. Before placing your light on a surface, check the rubber padding to ensure it won’t leave any marks.
2. For extra protection, we recommend placing a piece of cloth or paper under the base to prevent scratches or scuffs, especially on delicate surfaces.
3. Adjust the cord placement, ensuring it is safely out of the way to prevent tripping hazards or tangling.

Wall Lights:

1. Your light comes with Gantri’s patented wall mount kit, which includes a screw and anchor for drywall installation.
2. Locate the desired placement on your wall.
3. Assemble the wall mount according to the instructions provided.

• If installing into a stud, you may not need the anchor, but ensure the screw is firmly secured. Double-check that the cord runs cleanly along the wall, using clips to secure it if needed.

Floor Lights:

1. Place the base on a stable surface and thread the power cord through the rod, making sure it’s neatly tucked to avoid any trip hazards.
2. Assemble the rods according to the instructions provided, ensuring all pieces are securely attached.
3. Position the light in your desired space, and ensure it is stable by checking that all connections are tightened.
4. If your light feels unstable, try repositioning or using felt pads under the base for added support on uneven floors.

Clamp Lights:

1. The clamp can open up to a maximum of 1-5/8”, making it suitable for most desks, shelves, or other surfaces.
2. Position the clamp on the desired surface and tighten the knob until it’s securely fastened.
3. Adjust the angle of the light to direct it where needed, and ensure the clamp is stable and won’t slide or shift during use.
4. Make sure the power cord is safely out of the way, keeping it tidy with clips or wraps as needed.

Pendant Lights:

1. Verify that the ceiling mount is compatible with your space and can securely support the weight of the light.
2. Follow the included instructions to install the ceiling mount, making sure it is fastened securely into a structural ceiling element.
3. Adjust the cord length to your preferred height, thread it through the ceiling mount, and ensure the light hangs level before securing everything in place.